National Instruments NI 9237 Strain / Bridge Analog Input Module DSUB cDAQ cRIO

Description

National Instruments NI-9237 Strain / Bridge Analog Input Module DSUB cDAQ cRIO
Listed item is for (1) NI-9237 module with DSUB connector as shown in the first two pictures.
This module was repaired by NI and the packaging has not been opened.  Nothing but the module is included.  Please see our other listings for new and used NI-9237 modules including those with RJ50 connectors.
The NI-9237 is used for strain / bridge measurements and has four independent channels each with a dedicated 24 bit ADC that can sample up to 50kHz.  The signal conditioning, including signal amplification and filtering, is built in.  The bridge power (i.e. excitation) can be internal or external depending upon the power required.
These modules can be used for 1/4, 1/2, and full bridge applications.  The module also has circuitry for shunt calibrations.
This module currently sells new for ,900 from NI.  Please contact us if you need DB-37 cables or break-out boards.
The actual module is shown in the first two pictures.  The other pictures are only representative of the module type and are not of the actual item.
We want you to be fully satisfied with your purchase.  If you're not, please give us a chance to make it right before leaving negative feedback! If you have any questions, please don't hesitate to ask.